第一次提交
This commit is contained in:
243
Firmware/drivers/src/at32a423_xmc.c
Normal file
243
Firmware/drivers/src/at32a423_xmc.c
Normal file
@@ -0,0 +1,243 @@
|
||||
/**
|
||||
**************************************************************************
|
||||
* @file at32a423_xmc.c
|
||||
* @brief contains all the functions for the xmc firmware library
|
||||
**************************************************************************
|
||||
* Copyright notice & Disclaimer
|
||||
*
|
||||
* The software Board Support Package (BSP) that is made available to
|
||||
* download from Artery official website is the copyrighted work of Artery.
|
||||
* Artery authorizes customers to use, copy, and distribute the BSP
|
||||
* software and its related documentation for the purpose of design and
|
||||
* development in conjunction with Artery microcontrollers. Use of the
|
||||
* software is governed by this copyright notice and the following disclaimer.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED ON "AS IS" BASIS WITHOUT WARRANTIES,
|
||||
* GUARANTEES OR REPRESENTATIONS OF ANY KIND. ARTERY EXPRESSLY DISCLAIMS,
|
||||
* TO THE FULLEST EXTENT PERMITTED BY LAW, ALL EXPRESS, IMPLIED OR
|
||||
* STATUTORY OR OTHER WARRANTIES, GUARANTEES OR REPRESENTATIONS,
|
||||
* INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,
|
||||
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT.
|
||||
*
|
||||
**************************************************************************
|
||||
*/
|
||||
|
||||
#include "at32a423_conf.h"
|
||||
|
||||
/** @addtogroup AT32A423_periph_driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup XMC
|
||||
* @brief XMC driver modules
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifdef XMC_MODULE_ENABLED
|
||||
|
||||
/** @defgroup XMC_private_functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief xmc nor or sram registers reset
|
||||
* @param xmc_subbank
|
||||
* this parameter can be one of the following values:
|
||||
* - XMC_BANK1_NOR_SRAM1
|
||||
* - XMC_BANK1_NOR_SRAM2
|
||||
* - XMC_BANK1_NOR_SRAM3
|
||||
* - XMC_BANK1_NOR_SRAM4
|
||||
* @retval none
|
||||
*/
|
||||
void xmc_nor_sram_reset(xmc_nor_sram_subbank_type xmc_subbank)
|
||||
{
|
||||
/* XMC_BANK1_NORSRAM1 */
|
||||
if(xmc_subbank == XMC_BANK1_NOR_SRAM1)
|
||||
{
|
||||
XMC_BANK1->ctrl_tmg_group[xmc_subbank].bk1ctrl = 0x000030DB;
|
||||
}
|
||||
/* XMC_BANK1_NORSRAM2, XMC_BANK1_NORSRAM3 or XMC_BANK1_NORSRAM4 */
|
||||
else
|
||||
{
|
||||
XMC_BANK1->ctrl_tmg_group[xmc_subbank].bk1ctrl = 0x000030D2;
|
||||
}
|
||||
XMC_BANK1->ctrl_tmg_group[xmc_subbank].bk1tmg = 0x0FFFFFFF;
|
||||
XMC_BANK1->tmgwr_group[xmc_subbank].bk1tmgwr = 0x0FFFFFFF;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief initialize the xmc nor/sram banks according to the specified
|
||||
* parameters in the xmc_norsraminitstruct.
|
||||
* @param xmc_norsram_init_struct : pointer to a xmc_norsram_init_type
|
||||
* structure that contains the configuration information for
|
||||
* the xmc nor/sram specified banks.
|
||||
* @retval none
|
||||
*/
|
||||
void xmc_nor_sram_init(xmc_norsram_init_type* xmc_norsram_init_struct)
|
||||
{
|
||||
/* bank1 nor/sram control register configuration */
|
||||
XMC_BANK1->ctrl_tmg_group[xmc_norsram_init_struct->subbank].bk1ctrl =
|
||||
(uint32_t)xmc_norsram_init_struct->data_addr_multiplex |
|
||||
xmc_norsram_init_struct->device |
|
||||
xmc_norsram_init_struct->bus_type |
|
||||
xmc_norsram_init_struct->burst_mode_enable |
|
||||
xmc_norsram_init_struct->asynwait_enable |
|
||||
xmc_norsram_init_struct->wait_signal_lv |
|
||||
xmc_norsram_init_struct->wrapped_mode_enable |
|
||||
xmc_norsram_init_struct->wait_signal_config |
|
||||
xmc_norsram_init_struct->write_enable |
|
||||
xmc_norsram_init_struct->wait_signal_enable |
|
||||
xmc_norsram_init_struct->write_timing_enable |
|
||||
xmc_norsram_init_struct->write_burst_syn;
|
||||
|
||||
/* if nor flash device */
|
||||
if(xmc_norsram_init_struct->device == XMC_DEVICE_NOR)
|
||||
{
|
||||
XMC_BANK1->ctrl_tmg_group[xmc_norsram_init_struct->subbank].bk1ctrl_bit.noren = 0x1;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief initialize the xmc nor/sram banks according to the specified
|
||||
* parameters in the xmc_rw_timing_struct and xmc_w_timing_struct.
|
||||
* @param xmc_rw_timing_struct : pointer to a xmc_norsram_timing_init_type
|
||||
* structure that contains the configuration information for
|
||||
* the xmc nor/sram specified banks.
|
||||
* @param xmc_w_timing_struct : pointer to a xmc_norsram_timing_init_type
|
||||
* structure that contains the configuration information for
|
||||
* the xmc nor/sram specified banks.
|
||||
* @retval none
|
||||
*/
|
||||
void xmc_nor_sram_timing_config(xmc_norsram_timing_init_type* xmc_rw_timing_struct,
|
||||
xmc_norsram_timing_init_type* xmc_w_timing_struct)
|
||||
{
|
||||
/* bank1 nor/sram timing register configuration */
|
||||
XMC_BANK1->ctrl_tmg_group[xmc_rw_timing_struct->subbank].bk1tmg =
|
||||
(uint32_t)xmc_rw_timing_struct->addr_setup_time |
|
||||
(xmc_rw_timing_struct->addr_hold_time << 4) |
|
||||
(xmc_rw_timing_struct->data_setup_time << 8) |
|
||||
(xmc_rw_timing_struct->bus_latency_time <<16) |
|
||||
(xmc_rw_timing_struct->clk_psc << 20) |
|
||||
(xmc_rw_timing_struct->data_latency_time << 24) |
|
||||
xmc_rw_timing_struct->mode;
|
||||
|
||||
/* bank1 nor/sram timing register for write configuration, if extended mode is used */
|
||||
if(xmc_rw_timing_struct->write_timing_enable == XMC_WRITE_TIMING_ENABLE)
|
||||
{
|
||||
XMC_BANK1->tmgwr_group[xmc_w_timing_struct->subbank].bk1tmgwr =
|
||||
(uint32_t)xmc_w_timing_struct->addr_setup_time |
|
||||
(xmc_w_timing_struct->addr_hold_time << 4) |
|
||||
(xmc_w_timing_struct->data_setup_time << 8) |
|
||||
(xmc_w_timing_struct->bus_latency_time << 16) |
|
||||
(xmc_w_timing_struct->clk_psc << 20) |
|
||||
(xmc_w_timing_struct->data_latency_time << 24) |
|
||||
xmc_w_timing_struct->mode;
|
||||
}
|
||||
else
|
||||
{
|
||||
XMC_BANK1->tmgwr_group[xmc_w_timing_struct->subbank].bk1tmgwr = 0x0FFFFFFF;
|
||||
}
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief fill each xmc_nor_sram_init_struct member with its default value.
|
||||
* @param xmc_nor_sram_init_struct: pointer to a xmc_norsram_init_type
|
||||
* structure which will be initialized.
|
||||
* @retval none
|
||||
*/
|
||||
void xmc_norsram_default_para_init(xmc_norsram_init_type* xmc_nor_sram_init_struct)
|
||||
{
|
||||
/* reset nor/sram init structure parameters values */
|
||||
xmc_nor_sram_init_struct->subbank = XMC_BANK1_NOR_SRAM1;
|
||||
xmc_nor_sram_init_struct->data_addr_multiplex = XMC_DATA_ADDR_MUX_ENABLE;
|
||||
xmc_nor_sram_init_struct->device = XMC_DEVICE_SRAM;
|
||||
xmc_nor_sram_init_struct->bus_type = XMC_BUSTYPE_8_BITS;
|
||||
xmc_nor_sram_init_struct->burst_mode_enable = XMC_BURST_MODE_DISABLE;
|
||||
xmc_nor_sram_init_struct->asynwait_enable = XMC_ASYN_WAIT_DISABLE;
|
||||
xmc_nor_sram_init_struct->wait_signal_lv = XMC_WAIT_SIGNAL_LEVEL_LOW;
|
||||
xmc_nor_sram_init_struct->wrapped_mode_enable = XMC_WRAPPED_MODE_DISABLE;
|
||||
xmc_nor_sram_init_struct->wait_signal_config = XMC_WAIT_SIGNAL_SYN_BEFORE;
|
||||
xmc_nor_sram_init_struct->write_enable = XMC_WRITE_OPERATION_ENABLE;
|
||||
xmc_nor_sram_init_struct->wait_signal_enable = XMC_WAIT_SIGNAL_ENABLE;
|
||||
xmc_nor_sram_init_struct->write_timing_enable = XMC_WRITE_TIMING_DISABLE;
|
||||
xmc_nor_sram_init_struct->write_burst_syn = XMC_WRITE_BURST_SYN_DISABLE;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief fill each xmc_rw_timing_struct and xmc_w_timing_struct member with its default value.
|
||||
* @param xmc_rw_timing_struct: pointer to a xmc_norsram_timing_init_type
|
||||
* structure which will be initialized.
|
||||
* @param xmc_w_timing_struct: pointer to a xmc_norsram_timing_init_type
|
||||
* structure which will be initialized.
|
||||
* @retval none
|
||||
*/
|
||||
void xmc_norsram_timing_default_para_init(xmc_norsram_timing_init_type* xmc_rw_timing_struct,
|
||||
xmc_norsram_timing_init_type* xmc_w_timing_struct)
|
||||
{
|
||||
xmc_rw_timing_struct->subbank = XMC_BANK1_NOR_SRAM1;
|
||||
xmc_rw_timing_struct->write_timing_enable = XMC_WRITE_TIMING_DISABLE;
|
||||
xmc_rw_timing_struct->addr_setup_time = 0xF;
|
||||
xmc_rw_timing_struct->addr_hold_time = 0xF;
|
||||
xmc_rw_timing_struct->data_setup_time = 0xFF;
|
||||
xmc_rw_timing_struct->bus_latency_time = 0xF;
|
||||
xmc_rw_timing_struct->clk_psc = 0xF;
|
||||
xmc_rw_timing_struct->data_latency_time = 0xF;
|
||||
xmc_rw_timing_struct->mode = XMC_ACCESS_MODE_A;
|
||||
xmc_w_timing_struct->subbank = XMC_BANK1_NOR_SRAM1;
|
||||
xmc_w_timing_struct->write_timing_enable = XMC_WRITE_TIMING_DISABLE;
|
||||
xmc_w_timing_struct->addr_setup_time = 0xF;
|
||||
xmc_w_timing_struct->addr_hold_time = 0xF;
|
||||
xmc_w_timing_struct->data_setup_time = 0xFF;
|
||||
xmc_w_timing_struct->bus_latency_time = 0xF;
|
||||
xmc_w_timing_struct->clk_psc = 0xF;
|
||||
xmc_w_timing_struct->data_latency_time = 0xF;
|
||||
xmc_w_timing_struct->mode = XMC_ACCESS_MODE_A;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief enable or disable the specified nor/sram memory bank.
|
||||
* @param xmc_subbank
|
||||
* this parameter can be one of the following values:
|
||||
* - XMC_BANK1_NOR_SRAM1
|
||||
* - XMC_BANK1_NOR_SRAM2
|
||||
* - XMC_BANK1_NOR_SRAM3
|
||||
* - XMC_BANK1_NOR_SRAM4
|
||||
* @param new_state (TRUE or FALSE)
|
||||
* @retval none
|
||||
*/
|
||||
void xmc_nor_sram_enable(xmc_nor_sram_subbank_type xmc_subbank, confirm_state new_state)
|
||||
{
|
||||
XMC_BANK1->ctrl_tmg_group[xmc_subbank].bk1ctrl_bit.en = new_state;
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief config the bus turnaround phase.
|
||||
* @param xmc_sub_bank
|
||||
* this parameter can be one of the following values:
|
||||
* - XMC_BANK1_NOR_SRAM1
|
||||
* - XMC_BANK1_NOR_SRAM2
|
||||
* - XMC_BANK1_NOR_SRAM3
|
||||
* - XMC_BANK1_NOR_SRAM4
|
||||
* @param w2w_timing :write timing
|
||||
* @param r2r_timing :read timing
|
||||
* @retval none
|
||||
*/
|
||||
void xmc_ext_timing_config(volatile xmc_nor_sram_subbank_type xmc_sub_bank, uint16_t w2w_timing, uint16_t r2r_timing)
|
||||
{
|
||||
XMC_BANK1->ext_bit[xmc_sub_bank].buslatr2r = r2r_timing<<8;
|
||||
XMC_BANK1->ext_bit[xmc_sub_bank].buslatw2w = w2w_timing;
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
Reference in New Issue
Block a user